A) Product Name
Model: GS-HV ( High Voltage ) Corrugated Switchboard Matting / Non-Conductive Switchboard Mat / Dielectric / High Voltage Insulation Rubber Mat

B) Raw Material :
RoHS-2 THERMOPLASTIC ELASTOMER

C) Purpose
Switchboard matting is a non-conductive high-density rubber compound engineered to prevent electric shock around high-voltage equipment.
The non-conductive rubber compound creates an insulating barrier between the electrical source and the ground.

D) Scope
Our GS-HV is tested according to IEC61111:2009 Clause 5.6.4.3 under IEC 61111:2009 Class 4, Ideal for Dielectric Voltage / Withstand Voltage: 50,000 VAC and Recommended Maximum use Voltage: 36,000 VAC ( High Voltage Switchboard Matting )

E) Characteristics

1) Brand Name: GSE®
2) Model: GS-HV Switchboard Matting / High Voltage Insulation Rubber Mat
3) Top Surface - Anti-slip corrugated, with an anti-slip corrugated surface to provide a safe working environment, the pattern surface “grabs” the bottom of footwear, improving traction and safety.
4) Colour: Grey
5) TNB Test Certificate IEC61111:2009 Withstand Voltage 5.6.4.3: Class 4
6) SGS Test Certificate RoHS 1 & 2 Directive Commission Directive (EU) 2015/863
7) Product Compliance Status: -
A) BS EN 61111 Clause 5.6.4.3 Class 4, Voltage Withstand Test
B) Comply to RoHS I & II, On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates (BBP, DBP, DEHP, and DIBP, these chemicals are used to soften PVC and Vinyl products) into ANNEX II of the RoHS Recast Directive. The new law restricts each phthalate to no more than 0.1% (mg/kg = ppm; 0.1wt% = 1,000ppm) in each homogeneous material of an electrical product.

F) Specifications
1) Nominal Thickness: 7mm
A) Brand: GSE®, Model: GS-HV, Switchboard Matting,
(GREY colour) , 7mm Tk x 1,000mm (1m) Width x 6,000mm (6m) Length / roll